Premium Automotive Parts

Introducing our Turbine series of air cleaner wing nut which features a plastic body with a CNC machined anodized aluminum trim and stainless steel threads. With a height of only 0.4375 inches, a base diameter of 1.375 inches, and weighing 14.3g~ these air cleaner nuts allow for more hood clearance while weighing less.

Available in 5 different colors and 5/16in.-18 or 1/4 in.-20 threads.

Typically ships within 3-5 days

Made In Canada

We are proud to introduce our 14-inch carbon fiber air filter lid. Crafted from three meticulously hand-laid layers of carbon fiber, it’s infused with a high-strength epoxy resin. After demolding, we carefully trim and inspect the lid before applying a clear coat. A light wet sanding and polishing, removes any major defects, resulting in a brilliant gloss shine. Remarkably lightweight at only 128 - 146 grams (4.5 - 5.15 ounces) it is the lightest 14” air filter lid available. Our carbon fiber lid also provides increased hood clearance—rising just 6mm (1/4 inch) when installed. Additionally, the center of the lid is recessed by 6mm (1/4 inch) to accommodate the air filter nut.

Each carbon fiber air filter lid is made to order and takes approximately 2-3 weeks to finish.

Upon request we can also create the lids using different materials such as hex pattern carbon fiber, kevlar, or carbon/kevlar.

Made In Canada

Introducing our CRCD Phone Holder 2.0—engineered for the 1977–1982 C3 Corvette.

Mounted in place of the cigarette lighter and ashtray, this phone holder provides a convenient spot to keep your device easily accessible for navigation or audio display while driving. It features a sleek black USB-A and USB-C charger with spade connector ends, a felt-lined phone pocket, and an anti-flip slider to prevent your phone from falling during sharp turns. Additionally, an opening at the bottom of the holder allows USB or controller wires to pass through seamlessly. The center console lid remains fully functional and can be closed to discreetly conceal the modification when desired.

To install this part, the center console needs to be cut by the cigarette lighter and ashtray using a Dremel tool and an included cut guide. While removing the center console may provide an easier installation, it is not necessary.

Fit’s phones up to 3.3125” wide x 0.7” thick

Please contact us if you would like the location of the phone holder and USB swapped

Made to order and ships in 1-2 weeks

Made In Canada

Introducing our CRCD cup holders for the 180SX/240SX S13 Nissan Silvia. These cup holders are meticulously designed to match the contour of the center console and are made from extremely durable ABS resin. We designed these cup holders with the largest possible diameter of 77mm, allowing you to fit bottles, cans, and even larger coffee mugs and drinks. They are then painted to give them an OEM finish and can be optioned with a custom laser-engraved emblem.

Each cup holder also comes with a flexible PVC insert that prevents drinks from sliding or rattling in the cup holder and can be easily removed to clean spills.

Available in Left Hand Drive (LHD) & Right Hand Drive (RHD) configurations. Due to the e-brake mount bolt location on LHD applications, the cupholder is shorter with a removeable extension sleeve.

Made to order and ships within 1-2 weeks

Made In Canada

Introducing our CRCD Air Intake Kit for the 2004-2011 Mitsubishi Endeavor. This kit is designed to enhance the engine’s sound and performance while adding style to the engine bay. The change in engine sound is subtle during startup and mild acceleration, but during hard acceleration the engine roars to life and you will notice improvements on acceleration.

The exposed K&N air filter makes it easier to check its condition and know when it’s time for cleaning. The intake tubes are made using extremely durable ABS resin that is reinforced on the flanges with carbon fiber. They are then painted to give them a subtle wrinkled finish. 

Our air intake kit will not cause engine codes and improves performance with a shorter, less restrictive intake tube and a high-performance air filter that has more than 2x the surface area of the OEM filter. The same diameter intake tube ensures the ECU and MAF sensor accurately read the correct mass of air.

For a lower-maintenance dry performance filter option, such as the AFE Dry Flow S, feel free to contact us.

Made in Canada

Ships in 1-2 weeks

Introducing our Button series of air cleaner wing nut which features a plastic body with a CNC machined anodized aluminum trim and stainless steel threads. With a height of only 0.4375 inches, a base diameter of 1.14 inches, and weighing 12g~ these air cleaner nuts allow for more hood clearance while weighing less.

Available in 5 different colors and 5/16in.-18 or 1/4 in.-20 threads.

Typically ships within 3-5 days

Made In Canada

Introducing our Billet Aluminum 92mm LS Throttle Body Adapter Kit. Designed for Gen I & II small block Chevy engines running a Edelbrock Pro-Flo XT intake manifold. This kit allows you to use a widely available, cost-effective 92mm LS-style throttle body, instead of the costly, proprietary 90mm Edelbrock throttle body. Available in silver (raw machined aluminum) or black (anodized) finish.

Each kit includes:

• Billet Aluminum 92mm throttle body adapter

• (8) stainless steel M6 bolts for adapter and throttle body mounting

• 5mm drill bit

• M6×1.0 tap

• Custom CRCD drill guide

Please note: Drilling of the intake manifold is required. Required tools and materials include a power drill, tap wrench, 5mm hex key or socket, liquid gasket, anti-seize, and optionally, cutting fluid for smoother tapping.

Typically ships in 2-4 Days

Made in China - Designed and anodized in Canada

Intake Manifold Not Included