1968-1979 C3 Corvette Rear Coilover Mounts
Introducing our 1968-1979 Corvette Rear Coilover Mounts – a lightweight yet robust solution designed to revolutionize your C3 Corvette’s rear suspension.
Key Features:
Dual Functionality: Beyond their primary function as coilover mounts, the upper mounts double as crossmember reinforcements. This can help reduce or eliminate any deflection in the cross member during hard launches or shifting making the rear end feel more solid.
Reduced Body Roll: The outboard mounting position of the coilovers, in contrast to the central mount leaf spring, significantly reduces body roll, ensuring stability even during sharp turns.
More Responsive Suspension: We designed our coilovers to mount at the rear of the trailing arm. This allows the coilover to be more responsive to bumps in the road. This does however reduce some wheel travel but for medium to firm suspension setups this slight reduction in wheel travel isn’t an issue.
Lightweight: Engineered from 6061 aluminum, the complete coilover mounting kit weighs only 14.5 pounds while being exceptionally strong.
Wide Range of Compatibility: Designed to seamlessly integrate with Factory, aftermarket, or Van Steel trailing arms.
Sway Bar Compatibility: Whether you prefer aftermarket offset sway bars or factory sway bars, our coilover mounts are compatible, allowing you to fine-tune your vehicle's handling characteristics according to your preferences.
Freedom to Choose Your Own Coilover: Coilovers not included. When you purchase this kit we include a buyers guide for purchasing your own coilovers, or you can reach out to us for recommendations. This not only saves you mark ups and shipping fees but it allows you to go with the brand that offers you the best coilover for your ride or budget.
Easy Installation: These mounts can be installed in just 1-2 hours with minimal modifications required. Get back on the road quickly and enjoy the enhanced performance of your upgraded suspension.
Customizable Look: The mounts come unpainted, providing you with the freedom to showcase the raw aluminum look or easily paint them to match your vehicle's aesthetics. We can also finish these coilovers upon request with a powder coated finish.
Wheel clearance
15” Wheels - Up to 4” of backspacing
16” Wheels - Up to 4.25” of backspacing
17” Wheels - Up to 4.5” of backspacing
18” Wheels - Up to 5” of backspacing
19” Wheels - Up to 5.5” of backspacing
Custom bump stops are included to prevent damage to the coilover due to bottoming.
For aftermarket trailing arms (other than Vansteel), please check measurements to ensure these will fit your trailing arms. Also ensure trailing arms are in good shape. If your trailing arms have different measurements please contact us.
COILOVERS NOT INCLUDED.
Coilover Mounts are made to order and typically ship within 2-4 weeks.
Made In Canada
Introducing our 1968-1979 Corvette Rear Coilover Mounts – a lightweight yet robust solution designed to revolutionize your C3 Corvette’s rear suspension.
Key Features:
Dual Functionality: Beyond their primary function as coilover mounts, the upper mounts double as crossmember reinforcements. This can help reduce or eliminate any deflection in the cross member during hard launches or shifting making the rear end feel more solid.
Reduced Body Roll: The outboard mounting position of the coilovers, in contrast to the central mount leaf spring, significantly reduces body roll, ensuring stability even during sharp turns.
More Responsive Suspension: We designed our coilovers to mount at the rear of the trailing arm. This allows the coilover to be more responsive to bumps in the road. This does however reduce some wheel travel but for medium to firm suspension setups this slight reduction in wheel travel isn’t an issue.
Lightweight: Engineered from 6061 aluminum, the complete coilover mounting kit weighs only 14.5 pounds while being exceptionally strong.
Wide Range of Compatibility: Designed to seamlessly integrate with Factory, aftermarket, or Van Steel trailing arms.
Sway Bar Compatibility: Whether you prefer aftermarket offset sway bars or factory sway bars, our coilover mounts are compatible, allowing you to fine-tune your vehicle's handling characteristics according to your preferences.
Freedom to Choose Your Own Coilover: Coilovers not included. When you purchase this kit we include a buyers guide for purchasing your own coilovers, or you can reach out to us for recommendations. This not only saves you mark ups and shipping fees but it allows you to go with the brand that offers you the best coilover for your ride or budget.
Easy Installation: These mounts can be installed in just 1-2 hours with minimal modifications required. Get back on the road quickly and enjoy the enhanced performance of your upgraded suspension.
Customizable Look: The mounts come unpainted, providing you with the freedom to showcase the raw aluminum look or easily paint them to match your vehicle's aesthetics. We can also finish these coilovers upon request with a powder coated finish.
Wheel clearance
15” Wheels - Up to 4” of backspacing
16” Wheels - Up to 4.25” of backspacing
17” Wheels - Up to 4.5” of backspacing
18” Wheels - Up to 5” of backspacing
19” Wheels - Up to 5.5” of backspacing
Custom bump stops are included to prevent damage to the coilover due to bottoming.
For aftermarket trailing arms (other than Vansteel), please check measurements to ensure these will fit your trailing arms. Also ensure trailing arms are in good shape. If your trailing arms have different measurements please contact us.
COILOVERS NOT INCLUDED.
Coilover Mounts are made to order and typically ship within 2-4 weeks.
Made In Canada
Introducing our 1968-1979 Corvette Rear Coilover Mounts – a lightweight yet robust solution designed to revolutionize your C3 Corvette’s rear suspension.
Key Features:
Dual Functionality: Beyond their primary function as coilover mounts, the upper mounts double as crossmember reinforcements. This can help reduce or eliminate any deflection in the cross member during hard launches or shifting making the rear end feel more solid.
Reduced Body Roll: The outboard mounting position of the coilovers, in contrast to the central mount leaf spring, significantly reduces body roll, ensuring stability even during sharp turns.
More Responsive Suspension: We designed our coilovers to mount at the rear of the trailing arm. This allows the coilover to be more responsive to bumps in the road. This does however reduce some wheel travel but for medium to firm suspension setups this slight reduction in wheel travel isn’t an issue.
Lightweight: Engineered from 6061 aluminum, the complete coilover mounting kit weighs only 14.5 pounds while being exceptionally strong.
Wide Range of Compatibility: Designed to seamlessly integrate with Factory, aftermarket, or Van Steel trailing arms.
Sway Bar Compatibility: Whether you prefer aftermarket offset sway bars or factory sway bars, our coilover mounts are compatible, allowing you to fine-tune your vehicle's handling characteristics according to your preferences.
Freedom to Choose Your Own Coilover: Coilovers not included. When you purchase this kit we include a buyers guide for purchasing your own coilovers, or you can reach out to us for recommendations. This not only saves you mark ups and shipping fees but it allows you to go with the brand that offers you the best coilover for your ride or budget.
Easy Installation: These mounts can be installed in just 1-2 hours with minimal modifications required. Get back on the road quickly and enjoy the enhanced performance of your upgraded suspension.
Customizable Look: The mounts come unpainted, providing you with the freedom to showcase the raw aluminum look or easily paint them to match your vehicle's aesthetics. We can also finish these coilovers upon request with a powder coated finish.
Wheel clearance
15” Wheels - Up to 4” of backspacing
16” Wheels - Up to 4.25” of backspacing
17” Wheels - Up to 4.5” of backspacing
18” Wheels - Up to 5” of backspacing
19” Wheels - Up to 5.5” of backspacing
Custom bump stops are included to prevent damage to the coilover due to bottoming.
For aftermarket trailing arms (other than Vansteel), please check measurements to ensure these will fit your trailing arms. Also ensure trailing arms are in good shape. If your trailing arms have different measurements please contact us.
COILOVERS NOT INCLUDED.
Coilover Mounts are made to order and typically ship within 2-4 weeks.
Made In Canada
